Fanco - The fan is covered by a 2 year replacement warranty - conditions apply. See www.fanco.com.au for details.
Showing 1–18 of 28 results
-
DIY Subfloor Kit 1 – VKM 100mm for area up to 60m3
This DIY Subfloor ventilation kit is designed to ventilate a subfloor space of up to 60m3.
This kit includes the following components:1x VKM 100mm Inline fan – Click here for full fan specs
1x 6m of 100mm duct – this can be easily cut to suit your system. If more duct is required please see ‘accessories’ below.
1x External Vent
1x Intake Vent
1x 24hour Timer (The timer is plugged into a standard power point)
1x Flex & Plug (The fan is then plugged into the timer) Flex & plug is wired to high speed. Customers purchasing additional speed controller accessory are advised that the lead and plug will need to be removed so the fan can be hard wired to the switch.
1x Roll of Hanging Tape
1x Roll of Duct TapeThese components were selected because they are suitable for DIY installation. Using this kit in conjunction with accessories which need hardwiring will require installation by an electrician.
SKU: EUFUK1 -
DIY Subfloor Kit 3 – VKM 125mm for area up to 70m3
This DIY Subfloor ventilation kit is designed to ventilate a subfloor space of up to 60m3.
This kit includes the following components:1x VKM 125mm Inline fan – Click here for full fan specs
1x 6m of 125mm duct – this can be easily cut to suit your system. If more duct is required please see ‘accessories’ below.
1x External Vent
1x Intake Vent
1x 24hour Timer (The timer is plugged into a standard power point)
1x Flex & Plug (The fan is then plugged into the timer). Flex & plug is wired to high speed. Customers purchasing additional speed controller accessory are advised that the lead and plug will need to be removed so the fan can be hard wired to the switch.
1x Roll of Hanging Tape
1x Roll of Duct Tape
These components were selected because they are suitable for DIY installation. Using this kit in conjunction with accessories which need hardwiring will require installation by an electrician.SKU: EUFUK2 -
DIY Subfloor Kit 4 – VKM 125mm with two intakes 70m3
This DIY Subfloor ventilation kit is designed to ventilate a sub floor space of up to 70m3 and comes with two intake points.
This kit includes the following components:1x VKM 125mm Inline fan – Click here for full fan specs
2x 6m of 125mm duct – this can be easily cut to suit your system. If more duct is required please see ‘accessories’ below.
1x External Vent
2x Intake Vent
1x T Junction 125 x 125 x 125
1x 24hour Timer (The timer is plugged into a standard power point)
1x Flex & Plug (The fan is then plugged into the timer). Flex & plug is wired to high speed. Customers purchasing additional speed controller accessory are advised that the lead and plug will need to be removed so the fan can be hard wired to the switch.
1x Roll of Hanging Tape
1x Roll of Duct Tape
These components were selected because they are suitable for DIY installation. Using this kit in conjunction with accessories which need hardwiring will require installation by an electrician.SKU: EUFUK2BTO -
DIY Subfloor Kit 5 – Premium TT Silent 150mm for area up to 120m3
This DIY Sub floor ventilation kit is designed to ventilate a sub floor space of up to 120m3. This is a premium kit and includes the TT Silent inline fan.
This kit includes the following components:1x TT Silent 150mm Inline fan – Click here for full fan specs
1x 6m of 150mm duct – this can be easily cut to suit your system. If more duct is required please see ‘accessories’ below.
1x External Vent
1x Intake Vent
1x 24hour Timer (The timer is plugged into a standard power point)
1x Flex & Plug (The fan is then plugged into the timer). Flex & plug is wired to high speed. Customers purchasing additional speed controller accessory are advised that the lead and plug will need to be removed so the fan can be hard wired to the switch.
1x Roll of Hanging Tape
1x Roll of Duct TapeThese components were selected because they are suitable for DIY installation. Using this kit in conjunction with accessories which need hardwiring will require installation by an electrician.
SKU: EUFUK3S -
DIY Subfloor Kit 5 – VKM 150mm for area up to 120m3
This DIY Sub floor ventilation kit is designed to ventilate a sub floor space of up to 120m3.
This kit includes the following components:1x VKM 150mm Inline fan – Click here for full fan specs
1x 6m of 150mm duct – this can be easily cut to suit your system. If more duct is required please see ‘accessories’ below.
1x External Vent
1x Intake Vent
1x 24hour Timer (The timer is plugged into a standard power point)
1x Flex & Plug (The fan is then plugged into the timer). Flex & plug is wired to high speed. Customers purchasing additional speed controller accessory are advised that the lead and plug will need to be removed so the fan can be hard wired to the switch.
1x Roll of Hanging Tape
1x Roll of Duct Tape
These components were selected because they are suitable for DIY installation. Using this kit in conjunction with accessories which need hardwiring will require installation by an electrician.
SKU: EUFUK3B -
DIY Subfloor Kit 6 – Premium Silent TT 150mm with two intakes 120m3
This DIY Sub floor ventilation kit is designed to ventilate a sub floor space of up to 120m3 and comes with two intake points. This is a premium kit and includes the TT Silent inline fan.
This kit includes the following components:1x TT Silent 150mm Inline fan – Click here for full fan specs
2x 6m of 150mm duct – this can be easily cut to suit your system. If more duct is required please see 'accessories' below.
1x External Vent
2x Intake Vent
1x BTO 150 x 150 x 150
1x 24hour Timer (The timer is plugged into a standard power point)
1x Flex & Plug (The fan is then plugged into the timer)
1x Roll of Hanging Tape
1x Roll of Duct TapeThese components were selected because they are suitable for DIY installation. Using this kit in conjunction with accessories which need hardwiring will require installation by an electrician.
SKU: EUFUK3SBTO -
DIY Subfloor Kit 6 – VKM 150mm with two intakes 120m3
This DIY Sub floor ventilation kit is designed to ventilate a sub floor space of up to 120m3 and comes with two intake points.
This kit includes the following components:1x VKM 150mm Inline fan – Click here for full fan specs
2x 6m of 150mm duct – this can be easily cut to suit your system. If more duct is required please see ‘accessories’ below.
1x External Vent
2x Intake Vent
1x BTO 150 x 150 x 150
1x 24hour Timer (The timer is plugged into a standard power point)
1x Flex & Plug (The fan is then plugged into the timer). Flex & plug is wired to high speed. Customers purchasing additional speed controller accessory are advised that the lead and plug will need to be removed so the fan can be hard wired to the switch.
1x Roll of Hanging Tape
1x Roll of Duct TapeThese components were selected because they are suitable for DIY installation. Using this kit in conjunction with accessories which need hardwiring will require installation by an electrician.
SKU: EUFUK3BTOB -
DIY Subfloor Kit 7 – Premium TT Silent 200mm with two intakes 200m3
This DIY Sub floor ventilation kit is designed to ventilate a sub floor space of up to 200m3 and comes with two intake points. This is a premium kit which comes with the TT Silent inline fan.
This kit includes the following components:1x TT Silent 200mm Inline fan with flex and plug – Click here for full fan specs
2x 6m of 150mm duct – this can be easily cut to suit your system. If more duct is required please see ‘accessories’ below.
1X 6m of 200mm duct
1x External Vent
2x Intake Vents
1x BTO 200 x 150 x 150
1x 200 x 150 Reducer
1x 24hour Timer (The timer is plugged into a standard power point)
1x Roll of Hanging Tape
1x Roll of Duct Tape
These components were selected because they are suitable for DIY installation. Using this kit in conjunction with accessories which need hardwiring will require installation by an electrician.SKU: EUFUK4S -
DIY Subfloor Kit 7 – VKM 200mm with two intakes 200m3
ETA Early NovThis DIY Sub floor ventilation kit is designed to ventilate a sub floor space of up to 200m3 and comes with two intake points.
This kit includes the following components:1x VKM 200mm Inline fan – Click here for full fan specs
2x 6m of 150mm duct – this can be easily cut to suit your system. If more duct is required please see ‘accessories’ below.
1X 6m of 200mm duct
1x External Vent
2x Intake Vents Click here for vent specs
1x BTO 200 x 150 x 150
1x 200 x 150 Reducer
1x 24hour Timer (The timer is plugged into a standard power point)
1x Flex & Plug (The fan is then plugged into the timer). Flex & plug is wired to high speed. Customers purchasing additional speed controller accessory are advised that the lead and plug will need to be removed so the fan can be hard wired to the switch.
1x Roll of Hanging Tape
1x Roll of Duct Tape
These components were selected because they are suitable for DIY installation. Using this kit in conjunction with accessories which need hardwiring will require installation by an electrician.SKU: EUFUK4 -
-
-
-
-
-
-
-
-