TT PRO Mixflow Inline Fans – 200mm
View additional information tab for specifications and technical information.
The TT Mixflow Inline fan range is a collection of quality in line fans that is most commonly ducted and can be used for many exhaust applications, including sub floor air transfer. This model has a long life, continuous rated ‘German made’ ball bearing motor.
The TT Mixed Flow in line exhaust fan (200mm) has two speeds which can be selected via the switch on the side of the motor. The lower setting has an output capacity of 830m3/hr, the higher setting has an output capacity of 1040m3/hr. If the fan is set on the lower setting, the fan is much quieter. If you wish to switch between the two speeds the fan will need to be wired to the relevant speed controller (see accessories below).
TT Mixflow Inline Fan Features
- Ball bearing motors with two speeds.
- Built in overheating protection with automatic restart.
- Motor protection rating IP X4.
- The casing is made of high-quality durable ABS plastic (TT 100-200).
- Clever design ensures easy service and maintenance access
The TT mixflow inline fan can be mounted in any place along the duct system and at any angle (vertical or horizontal). Several fans can be mounted parallel or in series to each other to increase the air capacity and/or operating pressure. The casing is fitted with a mounting plate for wall mounting.
Typical Installation Diagram of a Sub Floor System with Inline fan: