DIY Subfloor Kit 7 – Premium TT Silent 200mm with two intakes 200m3
This DIY Sub floor ventilation kit is designed to ventilate a sub floor space of up to 200m3 and comes with two intake points. This is a premium kit which comes with the TT Silent inline fan.
This kit includes the following components:
1x TT Silent 200mm Inline fan with flex and plug – Click here for full fan specs
2x 6m of 150mm duct – this can be easily cut to suit your system. If more duct is required please see ‘accessories’ below.
1X 6m of 200mm duct
1x External Vent
2x Intake Vents
1x BTO 200 x 150 x 150
1x 200 x 150 Reducer
1x 24hour Timer (The timer is plugged into a standard power point)
1x Roll of Hanging Tape
1x Roll of Duct Tape
These components were selected because they are suitable for DIY installation. Using this kit in conjunction with accessories which need hardwiring will require installation by an electrician.
$629.00 $679.00
Some buildings have very little subfloor ventilation. Inadequate underfloor ventilation can lead to an accumulation of moisture in the sub floor. This in turn can cause structural and health problems for the home and it’s occupants.
The most common reason for inadequate under floor ventilation is that there not enough vents, or they are too small for the size and layout of building. Building extensions, building location and soil type can all contribute to problems in the subfloor.
This underfloor kit is specifically designed to service areas of up to 200 cubic meters. This kit also comes with a BTO (Y Junction) which allows for two intake points.
TT Silent Mixflow Fan Features
- Premium Silent Motor
- Long life ball bearing motor
- Suitable for continuous running
- IP X 4 rated motor
- Includes mounting brackets
- Overheating protection with automatic restart
- Dynamically balanced turbines
| Extract Capacity (free flow) | |
|---|---|
| Power Consumption On High (Watts) | |
| Noise (at 3m on low) | |
| Recommended Subfloor Size (based on 5 air changes) | |
| Motor Type | |
| Installation | Flex & Plug Included (can be plugged into standard power point), Please note: some optional controllers and accessories may not be suitable for DIY installation. Check individual product specifications before purchasing accessories |
| Type Of Fan | |
| Fan Brand | |
| Warranty On Fan | |
| Disclaimer |
