DIY Subfloor Kit 7 – VKM 200mm with two intakes 200m3
This DIY Sub floor ventilation kit is designed to ventilate a sub floor space of up to 200m3 and comes with two intake points.
This kit includes the following components:
1x VKM 200mm Inline fan – Click here for full fan specs
2x 6m of 150mm duct – this can be easily cut to suit your system. If more duct is required please see ‘accessories’ below.
1X 6m of 200mm duct
1x External Vent
2x Intake Vents Click here for vent specs
1x BTO 200 x 150 x 150
1x 200 x 150 Reducer
1x 24hour Timer (The timer is plugged into a standard power point)
1x Flex & Plug (The fan is then plugged into the timer). Flex & plug is wired to high speed. Customers purchasing additional speed controller accessory are advised that the lead and plug will need to be removed so the fan can be hard wired to the switch.
1x Roll of Hanging Tape
1x Roll of Duct Tape
These components were selected because they are suitable for DIY installation. Using this kit in conjunction with accessories which need hardwiring will require installation by an electrician.SKU: EUFUK4M
VKM – Centrifugal Inline Fan (200mm)
Max. Capacity: 1100m3/hr
Max. Power Consumption: 193w
Technical Specifications & Dimensions: View Additional Information & Specifications Tabs below
Please note that the lead and plug option is suitable for DIY install. However if you want to use this product in conjunction with speed controllers or other accessories an electrician will be required to hardwire them to the fan. For this reason, if you are purchasing accessories, we suggest the option without the plug and lead.SKU: EXVUV200